Misurare la circolarità sta diventando sempre di più un tema rilevante per le aziende, sia perché permette di comprendere le eventuali aree su cui agire per migliorare la circolarità, a livello aziendale e di prodotto, ed essere più sostenibili, sia perché si basa su dati che dovranno comunque essere raccolti ed analizzati dalle aziende in base alle ultime evoluzioni sul reporting di sostenibilità. Infatti, nel dicembre del 2022 è stata approvata la Corporate Sustainability Reporting Directive (CSRD), che introduce nuove regole per il reporting di sostenibilità, tra cui un maggiore dettaglio per tutta la parte inerente all’economia circolare.
Questa direttiva è uno dei capisaldi del Green Deal europeo e dell’Agenda per la finanza sostenibile e fa parte di una più ampia politica dell’UE volta a far sì che le imprese rispettino i diritti umani e riducano il loro impatto sul pianeta. La direttiva, infatti, estende ad una platea di imprese molto più ampia l’obbligo di divulgare informazioni in merito alle tematiche di sostenibilità, in termini di impatto ambientale, diritti sociali, diritti umani e fattori di governance, coinvolgendo sia per le grandi imprese sia per le PMI. Tale direttiva, inoltre, introduce una sezione molto più dettagliata per quanto concerne l’economia circolare, richiedendo informazioni rispetto all’uso delle risorse; i processi implementativi adottati; la performance delle imprese in termini di economia circolare, misurando i flussi di materiali in ingresso e in uscita che seguono i principi dell’economia circolare; ed infine l’impatto finanziario della transizione verso l’economia circolare. Maggiori dettagli su tutte le informazioni richieste possono essere trovati direttamente nel report specifico di EFRAG.
Per questo motivo, ora più che mai è importante definire una metodologia di raccolta e di analisi di queste informazioni, ed è anche per questo motivo che Tondo ha deciso di sviluppare due strumenti che permettano di misurare la circolarità a livello aziendale e di prodotto. I tool si propongono con un’interfaccia intuitiva da utilizzare e guidata nelle informazioni da fornire, restando dei tool basati su metodologie solide e già ampiamente testate. I tool, che sono attualmente in fase di beta-testing con alcune aziende che hanno dimostrato l’interesse, potranno essere utilizzati da tutte le aziende interessate a partire da inizio maggio del 2023.
Il tool per la misurazione di circolarità a livello aziendale è composto da 71 indicatori, e va a mappare sei aree chiave dell’azienda, ovvero: risorse materiche e componenti; risorse energetiche ed idriche; rifiuti ed emissioni; logistica; prodotto e/o servizio; risorse umane, asset, policy e sostenibilità. Gli indicatori e la metodologia di calcolo sono derivanti dalla specifica tecnica UNI/TS 11820, ed il tool, basato proprio su questa normativa, fornisce il livello di circolarità complessivo a livello aziendale e per ognuna delle sei aree chiave precedentemente indicate. Un vantaggio non indifferente è, in vista dell’obbligatorietà del bilancio di sostenibilità per le aziende dal 2024, iniziare a strutturarsi per la raccolta di tutti i dati necessari e per il calcolo del livello di circolarità che sarà nel futuro prossimo anche certificabile da enti terzi. Gli indicatori presenti sono suddivisi in “core” (8 indicatori), “specifici” (52 indicatori) e “premianti” (11 indicatori), e per poter calcolare l’indice non è necessario che l’azienda compili tutti gli indicatori, ma è sufficiente che siano calcolati tutti gli indicatori “core” ed almeno metà degli indicatori “specifici” per ciascuna delle sei aree chiave dell’azienda.
Il tool dedicato al calcolo della circolarità a livello di prodotto è fondato, invece, su una metodologia riconosciuta a livello internazionale, il Material Circularity Indicator della Ellen MacArthur Foundation. Inserendo i dati necessari viene calcolato il livello di circolarità di un prodotto, partendo dai flussi di materie utilizzati, in ingresso e in uscita relativi al prodotto, l’energia specifica per il prodotto, l’acqua consumata, e il packaging usato.
Nonostante i tool siano pensati per essere strumenti semplici e immediati da utilizzare e da comprendere, la raccolta e l’inserimento dei dati può essere non sempre così semplice, ed è per questo che Tondo, in caso di necessità può supportare le aziende per compilare in maniera appropriata i due tool, guidandole nell’utilizzo degli strumenti e nella raccolta dei dati necessari.
Questo articolo ti ha interessato? Scopri di più su Tondo e sui suoi progetti sul nostro blog. E se vuoi approfondire l’argomento, scrivici una mail all’indirizzo info@tondo.tech!
misurare la circolarità con Tondo
English version
Measuring circularity with Tondo
Measuring circularity is increasingly becoming a relevant issue for companies, both because it allows them to understand possible areas on which to act to improve circularity and be more sustainable, and because it is based on data that will still need to be collected and analyzed by companies according to the latest developments on sustainability reporting. In fact, in December 2022, the Corporate Sustainability Reporting Directive (CSRD) was approved, which introduces new rules for sustainability reporting, including greater detail for the part pertaining to the circular economy.
This directive is one of the cornerstones of the European Green Deal and the Agenda for Sustainable Finance and is part of a broader EU policy to ensure that companies respect human rights and reduce their impact on the planet. In fact, the directive extends to a much wider range of companies the obligation to disclose information on sustainability issues, in terms of environmental impact, social rights, human rights and governance factors, as the directive applies to both large companies and SMEs. This directive also introduces a much more detailed section regarding the circular economy, which will require information with respect to the use of resources; the implementation processes adopted; the performance of companies in terms of the circular economy, going to measure in input and output flows that have followed circular economy principles; and finally the financial impact of the transition to the circular economy. More details on all the required information can be found directly in EFRAG’s report.
For this reason, defining a methodology for collecting and analyzing this information is now more important than ever, which is also why Tondo decided to develop two tools to measure circularity at the company and product level. The tools are proposed with an interface that is intuitive to use and guided in the information to be provided, still being tools that are based on solid and already extensively tested methodologies. The tools, which are currently being beta-tested with a few companies that have shown interest, will be available for use by all interested companies from early May 2023.
The tool for measuring circularity at the company level consists of 71 indicators, and maps six key areas of the company, namely: material resources and components; energy and water resources; waste and emissions; logistics; product and/or service; human resources, assets, policy and sustainability. The indicators and calculation methodology are derived from the UNI/TS 11820 technical specification, and the tool, based on this very standard, provides the overall level of circularity at the company level and for each of the six critical areas noted above. A not insignificant advantage is, in view of the compulsory sustainability report for companies from 2024, to start structuring for the collection of all the necessary data and for the calculation of the level of circularity that will be soon also certifiable by third-party bodies. The indicators present are divided into “core” (8 indicators), “specific” (52 indicators) and “rewarding” (11 indicators), and in order to be able to calculate the index it is not necessary for the company to compile all the indicators, but it is sufficient that all the “core” indicators and at least half of the “specific” indicators for each of the six key areas of the company are calculated.
On the other hand, the tool dedicated to calculating circularity at the product level is based on an internationally recognized methodology, the Ellen MacArthur Foundation’s Material Circularity Indicator. By inputting the necessary data, a product’s level of circularity is calculated, starting with the utilized material flows, inputs and outputs related to the product, the product-specific energy, the water consumed, and the packaging used.
Although the tools are designed to be simple and immediate to use and understand, collecting and entering the data may not always be so easy, which is why Tondo, if needed, can support companies to fill out the two tools appropriately, guiding them in using the tools and collecting the necessary data.
Did you like this article? Discover more about Tondo and its projects on our blog. And if you want to know more, write us an email at the address info@tondo.tech!